Spy versus spy: Bur6erry trench coat revealed

I already wore it and love it. To my great surprise, even though it's lined only with a thin, non-insulating lining, it kept me warm even in fairly cool temps earlier this week, I think because of its double layer water- and wind-proof cotton twill.  It's sure to become a great inter-season topper.

 

The lovely striped lining!

Can you tell I'm pleased?  Especially with my new boots.  :)

I'll post some construction details later.

Trench coat: progress and details

The hardest part of making anything, especially something made up of many complicated parts, is, actually, making the decision.  And decisions.

In this case, stuff like:
 topstitching:  single pass or double?  single.  Self or contrasting?  darker than self but not in your face contrast.  Normal thread or jeans/heavy weight?  I went with extra strong, which thinner than jeans weight, but some small fiddly things like belt loops are stitched with self coloured regular weight thread - the heavier thread didn't seem appropriate on the very small stuff.

Aside from choosing to make two piece sleeves, one of the more interesting questions I had posed myself was the construction of the yoke and gun flap.  It occurred to me that it would be sort of cool if this piece could be simply free floating on the coat itself, with neckline and armscyes  being the only seams where it's attached to the coat.  To that end, I added a "mini gun flap" to the left side:



I deliberately cut the lining a little larger than the FF, to allow for potential fraying during handling. 

The order of construction was, stitch left and right front flaps to the yoke, press shoulder seams to front and topstitch them, add the epaulette carriers, and only THEN attach the lining.  This way the lining smoothly sits between the yokes and the coat itself.   The shoulder seams of the coat itself are pressed to the back which minimizes the thickness at that point.

There are no buttonholes on anything yet; I usually do those as the very last step.  That button is just sitting pretty pretending it's attached.

A word on this fabric.  (aside: is this really what Bur6erry uses in their trench coats? it seems heavier than what I saw in stores recently).  This fabric is like milled cast iron, it's that tough and strong.   It's so ......um, stiff, yeah, there, I said it - when it comes right down to the nitty gritty it's pretty much stiff as a board, and I do hope it softens in wear.  See that epaulette below? It isn't even interfaced, and doesn't it have super legs?

So, after dithering for a bit (decisions, decisions), I decided not to interface the facing.  I was afraid I'd feel I was walking wrapped in cardboard if I did.  Instead, I added a wedge of fusible hair canvas to the lapel area of the CF, pinked off at the lapel fold diagonal line. Should I tape it?  Any advice on that? (I didn't)

Things are coming along.  I'm almost at the point of cutting the facing and lining layer.

Jan 2015 update:  a few detail shots of the finished coat.

Collar tab buttonhole is non-functional, so I left it uncut.

Shoulder tab:

 Left gunflap:

 Sleeve and belt buckles, pocket, topstitching details:

Two piece lower collar, cut on the bias for a nice chevron pattern:

And, note the nice high collar stand.  Great for keeping the wind off my neck!

Trench coat plans!

A serious Bur6erry ;) knockoff has been on my to-do list for a long time: ever since Michael had a sale of the raincoating fabric, which I think was some time in early 2008.

Fabric:

The fabric is amazing. It's made out of two layers of cotton twill bonded together, one plain colour, the other patterned in a nice tan/black/white/burgundy stripe.  Both sides are waterproof and shed water beautifully. [Edit: when I started to wear the coat I discovered the double thickness and waterproofing make the coat very windproof as well, and consequently surprisingly warm.]

I bought three lengths, in tan, red, and blue, all from Michael's, plus a length of matching lining from Denver Fabrics.  I still have the receipt for the latter, dated June 2008!  

Tan coating on the right (4.8 m) with matching rayon lining (2.4 m) on the left.

Sky blue (1.6 m) and fire engine red  (3.0 m)

I'm not quite sure why I got these lengths. It was in the early days of my sewing, and I was building up a stash, maybe? Or, probably more likely, I had had no idea whatsoever what lengths were needed for say, a coat (the tan), or a jacket (the red)?   I think the blue was destined for my baby boy, but ahem, he's much bigger than I now, way too big now for such a miserly length to be useful for him.  But, blue combined with the tan could make a colour-blocked jacket perhaps. 

I love how water beads on this fabric - clearly it's been waterproofed!

Patterns:  

I have two - the Simplicity 4084 (Threads) and McCall's M5525.  I know there are others - Jalie, Marfy, and Burda, and may find them eventually for info purposes, but I plan on using a combo of the two I have.  

Alterations:

I like the M5525 upper back yoke and front gunflap, and the rain tab on the collar stand.  I prefer 4084's two piece sleeve, the direction of the side front pocket welts, and the buckle on the belt.  In addition, instead of what these patterns provide, I plan to make fold-over epaulettes (skinny underside), buckled rather than buttoned sleeve tabs, hanging tabs on the belt, and four instead of two belt holders.  

The under collar will be bias-cut and show the wrong side.  Buttons and buckles will be classic horn style.  Top stitching?  perhaps burgundy, to match the thin stripe of the underside and lining.  

I know some of you out there have used this cloth - I'd love to post links to those successful projects, so if you know where they are, please post in the comments section - thanks!  I'd also love to hear your comments and advice - this is a big project and your help will definitely go a long way to giving it justice!