Layered top knockoff - initial pattern development

Sleeveless tops, anyone?

They're my go-to summertime wear.  I've developed my own top pattern, both with and without a side bust dart, and frequently tinker with it to make the end product more interesting.  Like cutting on the bias, or adding pleats, for example.  I've also experimented with overlapping:

 and layering, here with shoulder pleats:

So when I saw this Vionnet top: 

CD$806 - ouch!

I thought, hmm, that's an interesting variation - and then, could I make it?  Drafting the front panel piece and attaching two of them to an ordinary back pattern piece seems simple enough, right?  It would be, but that's only half the story.  Look at the unusual seaming going on at the back: 

It has really interesting implications for the top's construction. Those shoulder yokes, for example?  I'm guessing they're not just decorative but functional too, that each is a continuous extension of the front panel, with no shoulder seam.  The diagonal seam from the armscye to the waist may also be an extension of the front panel around to the back:  which would imply that there's no side seam either.  Those were the two assumptions I went with.  

I started with a little schematic and sketched the one-shoulder diagonal panel:

Then cut out two of them. Voila! the front:

Starting with the same top schematic I sketched in the back seam lines, straightening the lines of the armscye a little for that futuristic aesthetic:  

The CB seam is useful if a sway back adjustment is desired, which is hinted at in the above layout.

Laying the front and back pieces on top of each other, the pattern pieces do look as they should - a tank top.

But when they're rearranged - combining the upper back shoulder yoke and lower back peplum pieces with the front panel, the pattern pieces look pretty extraordinary: 

Two pieces of each are required for the top; the CB seam would be at right in the above pic.  You wouldn't think you could possibly sew together something so odd and make a little top out of it, would you?  

My first proof of concept pattern pieces looked a little more complex:

Look at that:  I created a monster a rooster!!!  But it was drawn exactly on my TNT tank top, so I thought, OK, let's see how this works... And... it does!

The SA's are unfinished in the above, so it's pretty close round the neck and under the arms, and (thanks to a tiny drafting error on my part) it needs a bit more room round the hips to make those front panels more floaty.  The eagle-eyed amongst you  may notice that the shoulder "straps" are of different widths: I added a sliver of fabric to the left shoulder to round out that odd corner created at the shoulder seam point, where the outside front and back pieces met.  And it's also notable that this design demands a bra with straps that are set closer to centre than what I'm wearing. Peekage is not a look I favour (yuck!), and I wouldn't actually wear this design until I found a suitable undergarment.

The back is very close to the original.  The shoulder yokes could should be decreased in width and shortened vertically, and the diagonal peplum seam raised a bit. One important functional difference is that the original has a CB invisible zipper, but my top doesn't.  When you try to pull it on with both arms, the neckline closes up - a function of those loosely hanging overlapping panels.  So getting into it is a funny sequence: first the right arm, then the head, then the left arm, then you shimmy the whole thing down.  The zipper is truly unnecessary. 

More to come, after I've worked through these revisions. 

A little tweed top

I have a small remnant of my grey boucle/tweed.  It's just enough for the front of a top.  There's not enough for the back or sleeves.  Those sections will be made out of a black poly/rayon/spandex knit, a nice ponte.  I had to fall off my Stashbusting wagon (gasp!), and purchase one meter of the ponte to accomplish this.

I've been pondering how to sew up this top.  My initial idea was a top based on the Go 4001 dress, a side princess pattern, similar to the one I made for my brown suit. I made the full dress, too.

However, the boucle remnant is just barely too narrow for the two front pattern pieces.  It's only wide enough for the front if cut out of a single pattern piece, with a side or bottom dart for bust shaping. Arrrgh, right?

What has held me back from using a single front piece is, first, that it would look a bit boring, with limited shaping. More importantly, such a top would play to one of my favourite pet peeves of fashion, and that is what's known as "coffin clothes", i.e., garments that look interesting from the front only but have a dull, non-matching back.  I see dresses like this on the web pages of high end stores all the time:  sewn up out of beautiful front fabrics or with interesting front details, only to disappoint with truly nothing to look at, dull, dull, dull backs.  Not only does this generate an instinctive emotional ugh in me, but it also gets my back up that one is expected to pay through the nose for a supposedly designer garment that looks good only from one vantage point. My top, due to the remnant width limitation, was in danger of becoming just such a coffin item.

Then I thought, why not colour block it?  The boucle is wide enough for a centre front and side back panels. The black knit could make up the sleeves, side fronts and centre back pieces.  That way, the boucle side back pieces would add some interest to the back of the garment.   Colour blocking is also slimming.  Not really of importance, but heck, when fate offers you a little freebie along the way, why not grab it. And the knit sections will allow me to eliminate the CB zipper.

Here's the colour-blocked layout on the two fabrics:

Boucle:  side back and centre front pieces.  

Black ponte:  centre back, side front, and sleeves.  

The Go 4001 dress is sleeveless, with a very lovely boat neckline and slightly cut-in armscye.  I compared its neck, shoulder, and armscye shape to to the Jalie 2805 tee pattern, and adjusted accordingly so the sleeves fit correctly.

Pins in the boucle mark a slight widening of the armscye to match Jalie 2805 and the Jalie sleeve.

The back shoulder is also widened from 3" to 4", but the increase is centered on the existing shoulder in order to prevent gaposis. 

Inside front:  I lined all three boucle panels with grey bemberg lining, and sewed them together in such a way that the raw seam edges  are neatly enclosed between the boucle and the  lining.












Inside back.

Outside front:  the raw edges are caught by a narrow zigzag on the tweed, along the seamline.  Thanks to the texture of the boucle, the zigzag is completely invisible.

Outside back.
















This is the stage I reached by this afternoon, when it started to get dark.  But it's finished now:  an easy day's work from layout to hiding that last knotted thread.  If not for those lining pieces, and my wish to hide all the raw seams instead of just serging the lot together, plus some completely superfluous but cute (I think!) additional details, it would have taken no more than half the day to sew up.  

Oh, the skirt, and jacket, and silk blouse are also finished.  Whoever guesses correctly what I'll show in my next post gets a bright gold star!  I have lots of them to go around, btw!  ;)

Silk blouses: I'm on a streak!

With three Marfy 1913 tops completed and the second Burda 10-2011-128 now in progress, I'm continuing my blouse-making streak. Very useful, to be sure, as my newest three jackets desperately need coordinates. However, the pleasure of this run is starting to ebb a tad, and I'm hearing something a little different whispering at my subconscious with increasing insistence.  But whoa, I'm getting ahead of myself. To wit, the blouses:

I picked this pattern because it comes with a sewn-on scarf.  Tremendous!  I adore scarves, so this pattern is ideal for me.  

Here it is with the scarf ends tied up.  I shortened the scarf from 140 cm to about 110, because I couldn't see myself with a big bouffant bow under my chin.  No way.  Ever.  

Other than that, I cut a straight 38, raised the centre opening about 3 cm or so, shortened the sleeves ~4 cm to bracelet length, and tamed the slouchy look by shortening the shoulder line by 4 cm plus raising the armscye by 2 cm.   This blouse is unfitted, and could be made more so with the addition of bust darts and a bit of side shaping (it has none whatsoever), but the silk is lightweight and, though this isn't visible in a photo, swirls round the body nicely.  This fabric is the bit of silk jacquard I dyed recently.  It's heaven to touch and even more so to sew, not least because the jacquard weave gives it wonderful resistance to fraying.  Happy me, I have a bit more of it, and am likely to dye it a dark burgundy for another blouse. 

I also love the fact that the front slit finish is created by wide facings that also finish the front neckline and are caught in the shoulder seam.  My current effort of this pattern (once is good, twice is better, right?) is a dark, semi-transparent stretch silk chiffon, and these front facings will add some modesty assurance exactly where it's needed.  

On the Marfy 1913, third time's the charm.  I widened the neckline a touch and lowered the armscyes back to original design, and it fits just exactly as it should. 

The fabric is a whisper-light, smooth silk habotai, which is the plainest weave there is, in a neat abstract that seems to hint at florals without being flowery, in midnight blue and white. Sewing this one was a challenge:  I've been fighting static cling in it far more than any of the others - with the very cold weather, there's no moisture in the air to carry away the charge built up by handling - methinks I should refrain from sewing such light silk unless it's +35C with 90% humidity?! 

Or, how about sewing in the sauna?!

;)

Brown blue cashmere suit: stashbusting really works!

As hard as it may be to believe it, this three piece outfit, completed at last, marks the end of a four year saga.  It began in New York in Jan of 2010, when I got tempted by a dark brown, shot with blue and golden brown threads, cashmere wool woven.

The pic above gives the best sense of the fabric: very soft, very dark brown and yet not only brown; the bright blue and golden highlights are very clear in close-up. In the pic, the jacket is paired with the brown silk jaquard top I just made. Unquestionably this cashmere is the most expensive piece of fabric I ever sprang for. Lightweight, soft as down, springy, yum!  I think it came from Beckenstein's - I recall my sister in law took me for a long day's trawl through the fashion district and this was one of our last stops, a fabric store dominated by menswear cloths of the highest quality.  Sound familiar?  I believe it should.

I got the fabric with only a jacket in mind, but the cut was so wonderfully generous (2.2 meters) that after the collarless V7975 jacket was cut, the remainder yielded a sleeveless two piece dress made up of a princess-seamed top (Go 4001) and simple pegged skirt (Burda 9-2008-120). I finished the top fairly promptly, then continued apace with the jacket.  All of a sudden, with everything cut and mostly sewed together, the project got stalled by this, that and t'other.  Mostly two snags:  I resisted the idea of cutting buttonholes into this scrumptious fabric but wasn't sure how to proceed; and I was't entirely at all thrilled with the shape of the skirt.

Still, we all  know the UFO refrain:  unfinished is unstarted, and merely cut out is money thrown out.  I finally tackled the bull cashmere billy goat by the horns and, tadaaa! at last can call the top, jacket and skirt, and therefore the entire three piece outfit, completed at last.  At very long last, indeed!

So, without further ado: all on the dress form, because, well, Baby, It's Cold Outside.

Jacket:  Vogue 7975, size 10 straight up, lined with chocolate brown silk jacquard (the Marfy 1913 chocolate brown top I made last week was eked out of the last little remnant of the very same silk).  It's a closer, better fit than the red boucle jacket, which was a size 12.

Instead of buttonholes, I sewed on three snaps and covered the right side ones with deep blue "tweedy" buttons.

I stabilized the fabric - all 2.2 meters of it - with lightweight fusible knit.  I can hardly believe I had the patience to do that, but yes, to my amazement.... The jacket is further padded with a chest and upper back shield, sleeve heads, and shoulder pads.  I was going to forego the pads, but realized late in the finishing that lack of them would give the jacket unsightly drag lines between armscye and waist, so in they went.

The top is based on the bodice to hip line Go 4001 sleeveless dress. I love its strong side princess line, it's perfect for anyone with nice sized assets on top. I made the dress back in 2009; for those of you not party to Sewing Review, the pictorial set starts here.

 This top is also lined with the same brown silk jacquard. Easy peasy. Nothing more to add.

The Awful Skirt:  Burda 9-2008-120 simple pegged aka "tulip shape" skirt. IMO this skirt has a very strange shape, with a really strong pooch line at the hip, I suspect mainly due to the tulip shape, though some of that may be the fault of my drawing the pattern to match the dimensions of my generous derriere/small waist figure.  I tried to slim it down but it seemed to me I was only making matters worse, worser, and worsest, so finally gave up on alterations, returned to the pattern's original truly weird line, and decided to finish it with much more ease in the hips than I would ordinarily. Lined with a heavy 80% bemberg/20% polyester blend lining in very dark navy, it works, but is far from ideal. Embarrassed, much?  Oh yeah, very. C'mon, how hard can it be to get a simple no waistband skirt to look decent, for pity's sake?  It hangs off my hips just fine, but then goes all "I wanna be a jodhpur" a few inches further down.

What's really funny is that a gal showed up in just such trousers to this week's group photocall of 2014 Oscar nominees:

Dressed to impress: Gravity's Sandra Bullock and American Hustle's Amy Adams posed with director/writer Alfonso Cuarón, singer Karen O and actor Leonardo DiCaprio among others in the line-up (Daily Mail credit: http://www.dailymail.co.uk/tvshowbiz/article-2556576/OSCARS-2014-NOMINEES-Full-line-pose-group-shot-pre-awards-luncheon.html#ixzz2t45RHkzs )

Though it's now finished, I still aim to sneak up on it with a bit of needle and thread to oh so gently, millimeter by millimeter, tamp down some of this skirt's dressage ambitions. Sheesh. The bottom line (pun intended!) is that my hip line would do better with a different pattern.  I'll most emphatically never, not ever but ever, use this pattern again.  Basta!

But wait, perhaps NOT Basta!  With a little research under my belt today, I discovered that there really is a trick to making a good looking pencil skirt.  Take a look at the detailed skirt sloper workup, nicely demo'd for the rest of us by the Overflowing Stash. This is almost tempting me to rip the skirt apart again, and re-sew it a third time.  Maybe. It'd be a pity to let an otherwise nice outfit, and such a luxurious one at that,  languish unloved in the closet.  Especially as I'd been a busy little bee making, and continuing to make, go-with tops:

Both the cashmere top and the brown silk jacquard top coordinate beautifully with these two scarves:

The green python blouse also works with the brown; its deep blues and oranges play well with the blue and golden threads of the jacket: 

And I have three more potential playmates in the pipeline:  two nice polys and a silk crinkle chiffon.  Just draped onto the form, and feeling hopeful about them:

Poly satin

Lightweight poly crepe

Crinkle silk chiffon

As a concluding remark, I'm happy to say that the stashbusting challenge prompted me to finally buckle down and finish this set, already.  I'm thrilled to bits - the jacket is scrumptious, and a good excuse for some fun and easy blouse-making time.  But, how do I count this set for stashbusting?  The sleeveless top was completed some time ago, but without its partners, it would never have been worn. In fact, though already finished, it was still languishing in the sewing pile along with the rest of its set, an abandoned orphan if ever I saw one. So, 2.2 meters of fabric, 1.8 meters of silk?  Done!

From scarf to garment: the one-yard top, and pattern comparison

On one of my visits to Montreal, I was tempted by a couple of silk crepe scarves crumpled up in a "going for a song" sale basket of an Indian clothing store.  Not because I wanted scarves that particular day, but because the silk was a wonderful springy crepe with lovely print designs, and I thought they could easily be converted to simple sleeveless tops.

This time, I used the downloadable Marfy 1913 sleeveless blouse pattern. Rather than using the standing collar pattern, I simply bound the neckline and armscyes with bias strips.  Since I don't care for the fashion faux pas of peeking undergarments, I didn't pleat as much of the neckline as suggested on the pattern piece.  Per pattern design, I did insert the elastic in the hem; in the pic above, the hem is pulled down to make the shirring visible.

The print is is so beautiful:  are these lilies?  irises?  not according to the leaf, which I don't recognize at all. Any guesses? And, though at first glance it all appears to be monochromatic in tones of cornflower blue, close examination shows that there are green and brown tonalities as well, clearly visible in the leaves.

The scarf had a rolled edge that I unpicked before testing the layout. Laid out flat, it's a perfect 36 inch square:  since India is a metric country, as is Canada, it was clearly made for the American market! As it turned out, the two main pattern pieces fit perfectly in the square:

I cut size 42, with wide side seam allowances.

The orange pin heads mark the shoulder corner of the back piece moved from upper left to lower right.

The front, at lower left in the upper photo and lower centre in the lower one, was cut on a fold, while the back (at upper left in the upper photo and lower right in the lower one) was cut with a center seam.  The remaining fabric at upper right provided more than enough 1.5" (4cm) bias strips for the arm and neck edges.

Since the neckline is high in this pattern and a back opening is necessary, having a centre back seam was functionally useful. I made a thread chain loop and found a blue button that's a surprisingly good match to this fabric.  A self-covered button would also be great. 

 Here's the finished top again, this time with the elastic hem loosened upwards, giving a short blouson effect.

Silk crepe is my favourite of all fabrics for sleeveless tops. It wears like iron, feels like butterfly's wing on the skin, is warm to the touch without burning, breathes beautifully, and has a springiness that's superbly comfortable.  Some years ago I drafted a simple sleeveless top pattern, and have used that ever since as the basis for variations not just in silk but also linen and poly.

Silk crepe tops:  self-drafted pattern with pleated neckline, early 2013 at left, early 2011 at right.  

So how does the Marfy pattern compare with mine? My pattern has a scooped out neckline both front and back, making any additional opening redundant. The Marfy neckline is high, so even without the standing collar it needs a neck opening.  Note that though it's originally placed at CB in the pattern, this opening can easily be made into a design element  in the front, either angled towards the sleeve or at centre front, perhaps with skinny bias tubes to tie into a pretty bow instead of a button or hook.

Though not readily visible in the finished garments, there are other minor differences between my pattern and the Marfy. My pattern has shaped side seams for a closer fit in the waist, a higher armscye, and its outer shoulder is less cut in towards the neck, for more secure coverage of these pesky undergarment straps.

Self drafted pattern, box pleat variations:  at left, patterned red silk crepe scarf with short hem and two hem pleats; silk-cotton blend at right.

So, will I make the Marfy 1913 top again?  Of course, and at least once with the standing collar!  it's great to have another top variation.

Brown-blue cashmere: credit where 'tis due

Why? I occasionally employ two photogs, both wedded to their art. Ahem, in one instance, also to me. These here were taken by the SENIOR snapper. I complain so bitterly about the doggone awful results of his shutterbugging (ironically, at MY request), never permitting that it may be the subject of his attention, not his skill with the camera, that may be the cause... Today, the gentle soul demanded credit for his unstinting love and moral/logistical support. Of many years.

QED. But boy, he takes awful photos (of me).



This is part 1 of 3 of my cashmere skirt suit. The top is based on the Go 4001 dress, lined to the edge with dark brown silk jacquard, with a CB invisible zipper. I don't believe how long it took me to get this wee little thing done.






The last photo shows the long skirt - it's still unfitted, unfinished, unhemmed - but it gives the idea of a two-piece dress that'll go under the jacket. I'm lucky to have been able to eke out three pieces out of the length of fabric, and ditto for the silk jacquard I'm using for lining. Just barely enough, but enough. Basta!



Almost-black garments don't photograph well on freshly fallen snow. I had to do major exposure adjustments to show these. I do love the princess seaming of the top, though.

I'm just about done attaching the lining to the jacket. Problem is, I can't decide on closure. Buttons? Snaps? Nothing? I don't want buttonholes, ordinary or welt. I'm tending towards concealed six rare earth magnets from Lee Valley Tools just down the road, invisible and indestructible (except if ironed: you never ever iron a magnet).