More sewing aids: sleeve and tailor's boards

I was so pleased with the results of my most recent sewing-related woodworking effort, that I decided to complete my collection of sewing related items while the woodworking tools were all out.  You know how it is... one thing leads to another.

Now, I do have a purchased sleeve board - a rickety folding little thing that collapses if you so much as look at it, never mind press a heavy iron to it.  A source of constant annoyance and frustration.

I do love the internet as a resource.  Just do an image search for "sleeve board for ironing", and up pop all sorts of versions.  I based mine loosely on the free board pattern available from Fearless Makers.

My version is made out of native Canadian hardwood:  sugar maple, 7/8" thick.  It's 25.5" long on the tapered side, and 22" on the other, and both are 5.5" wide  at the widest point.  I also made the taper somewhat narrower than the pattern, thinking that with very small wrists and thus small cuffs and sleeve openings, a very small taper might be particularly useful for me:

Both faces will be covered with batting and cotton to serve as ironing surfaces.

I'll be the first to admit that I have a teeny tiny tendency to over-engineer things. Of course I did that here too.  While the pattern calls for a single thickness of board for the support bridge, mine is made out of a doubled thickness:  I was afraid a single piece just wouldn't provide enough stability in use, especially as I wanted to avoid using screws to hold it all together.   The flat boards are simply bonded to the bridge with high strength wood glue, Titebond III; I felt that the double width of the support bridge was necessary to provide plenty of surface for the glue to grip.   

I wanted to have the finished item look, well, finished, rather than made of raw wood - so I used a router to round off the edges of the bridge, and stained and varnished the non-functional, visible surfaces while leaving the surfaces which will be covered with batting and cotton, in the raw state.  

The second, and final sewing item I made is a tailor's board. I based mine - again, with modifications - on a pattern published in this University of Kentucky pressing equipment document.   My main modification was to ensure both main pieces were the same length along their longest axis (they're not in the pattern).  I also put them together differently than what you'll see in internet photos:  whereas in all available versions out there the tapered points on the two main boards are oriented in the same direction, I made them point in opposite directions.  

Why would I do that?!  Well, I'm right handed, so I hold the iron in the right hand and iron from right to left.  Thus, I want to have the boards oriented with the points to the left while I'm using them, and the area in front of them clear for my left hand to manipulate the garment piece.

So, flat surface in use:

And, curved surface in use: 

Also, I put the pieces together in such a way that there are three points of support when the board stands upright, making it very stable.  This way, I can use the curved end to press sleeve heads.

 The pieces are fastened together with glue and dowels - no screws.  

You probably can't see the wood details, which is a pity. I found a beautiful little piece of bird's eye maple for this project.  Very pretty.  It'll be just a delight to use and admire its grain while ironing! 

As a bonus, I got myself a wee little mini-clapper out of the effort:  it's the removed (jig-sawed out) part of the support bridge of the sleeve board.  I just didn't have the heart to throw it in the fire... so I sanded it down and kept it instead.  

  Now it's back to regular programming, aka sewing!

Sidetracked! How I wound up making sewing aids

It all started about six weeks ago - a kind of Advent plan for the New Year.  As I was carrying my instruments to a rehearsal gig, I realized that I really need to streamline the experience.  Better than that, I realized I have the wherewithal to do something about it!  You already saw the new soft padded carrying case I made for my recorders - aka straight wooden baroque flutes.  Bach, Vivaldi, Telemann, and Handel, not to mention many other composers of that period, wrote for these flutes - the modern metal flute didn't exist in those days.  Neither did the clarinet or saxophone for that matter, but that's another story... And the side  blown wooden flute kinda came into its own with Mozart ( Pa-pa-pa-pa-pa-pa-pa-pagge-e-e-e-eeeno!) who, funnily enough, detested the flute but wrote exquisite music for it.

So I decided to apply my "soft materials engineering" (sewing) skills to a little hard materials task:  making a portable yet very stable music stand.  One that will stay upright and prevent my delicate wooden toys from crashing to the floor in the hustle and bustle of being bumped by an inattentive musician in a large group.

A quick trip to the local hardware store, a narrow oak board and a few dowels, and a little elbow grease, gave me this:

A recorder stand!

The lower part of the base, folded flat above, rotates out when in use:

That's three sopranos, two tenors, two altos, and a sopranino. 

This is a very stable, completely non-tippy, happy musician configuration.  :D

Then I made a base for my modern instruments:  

The base is rosewood, so it's naturally heavy.  Since it isn't intended for travel, it doesn't need a cross piece.  

It can hold a clarinet, up to three flutes, a spare flute head, and, in a cunning little hole at left, a tuning fork!  

(keep reading, I'll get to the sewing part soon....)

You know how one thing leads to another?  I was chatting with a relative who also plays recorders in a chamber group, and she mentioned she doesn't have a protective case for them.  Or a stand.  

Digs to the rescue: 

The carrying case is designed so the alto recorder can be stowed without being disassembled.  

I also made her a matching padded velvet bag with a flat bottom and drawstrings to carry both the stand and the recorders.  

Then I made a stand for my bass flute:

The base is made out of morado, a dense and heavy Bolivian rosewood.  It's big enough that I can add pegs for a regular C flute and an alto flute without compromising its stability.  There's actually quite a bit of woodworking in this little item, as the original piece of morado was a narrow board.  I had to plane the sides very flat, dowel and glue them together, cut to shape, sand, sand, and sand.... The vertical dowel is inset into the base, glued in, and secured with a large counter-sunk bolt from below. 

Bass flute??? Oh, people, it's a thing of beauty: 

On to sewing!

I discovered a wonderful new wood store nearby when researching the materials for these things, and... one thing led to another.  I thought to myself, there are a few sewing things I've always felt the lack of.  Like a clapper and a point turner. 

So I made them. 

For these two items, I picked a South American hardwood called jatoba, aka Brazilian cherry.  It's nothing like a cherry tree:  its only similarity to cherry is its colour, which also resembles a light shade of teak. The wood is very dense (thus heavy), and very hard, so it keeps edges and points very well.  Jatoba is a very common large tree, used for things like railroad ties.   

The clapper is made of a double layer of the board, 13" (33 cm) long, 2.5" at the wide end, 2" at the narrow end, and 2" high. It weighs 2 lbs 6 oz (1.1 kg).  I still want to add grooves along the sides to help with grasping it, but.... my routing skills are rudimentary, and I'll want to build a jig to hold the clapper in place and guide the router in a straight line... so it may be some time before I dare to apply a cutting blade to this very lovely hunk of very smooth wood. 

Here's my new point turner: a useful little piece of modern sculpture!

I'm willing to hazard a guess that might be the only jatoba point turner in existence.....

I freehand designed this one.  The top is 13 3/8" long. The base is 11" x 4.5":  very useful for clapping down entire items like pockets.  The hole in the middle, is 2 1/4" in diameter, perfect for grabbing it.   The whole thing weighs a whopping 3 lbs 9 oz (1.6 kg).   Everything is held together with glue and dowels - no screws. 

Both pieces are sanded very, very smooth:  120, 220, 320, 400, and 600 grit.  That's the natural colour of the wood, too - since they're intended to be used with fabric and a hot steamy iron, I couldn't (and won't) oil or varnish the wood in any way.  

I got only a short (and inexpensive!) length of board for this project, 33" overall. My stingy pattern layout skills allowed me to lay out the parts in such a way that  I made the two pieces above and still have a 7" square board to serve as another instrument stand.  Very efficient use of materials, if I do say so... 

More sewing aids in the works....  Hint:  I'm on a roll!